For connection of telecommunication units inside of buildings in dry and wet rooms, also outdoors if the cable is protected against direct sun irradiation. Not for use in power circuits!

Conductor material:  Bare copper
Conductor construction:  Solid, class 1
Insulation: PVC TI1
Stranding unit: Quads
Stranding: Bunches
Sheathing material: PVC TM1
Colour of outer sheath: Gray RAL 7032
Flame retardant: VDE 0482-332-1-2/IEC 60332-1
Maximum operating temperature, fixed: -30 / +70 °C
Temperature, moved/during installation: -5 / +50 °C
Bending radius, fixed installation: 7,5 x DA
Insulation resistance: 100 MOhmxkm
Coupling K1: 300 pF
Operating capacity: 100 nF/km
Loop resistance: 130 Ohm/km
Nominal voltage U: 300 V
Core identification:  Colours + rings
Attenuation at 800 Hz: 1,7

Additional information: Stranding: 4 cores twisted into star-quads, 5 star-quads stranded into one sub-unit, sub-units layed up in layers. Core identification: The star-quads of each bunch are colored as follows: red, green, gray, yellow, white. The cores within one starquad are marked by rings:

a-wire 1: without ring
b-wire 1: one ring, wide spaced
a-wire 2: double ring, wide spaced
b-wire 2: double ring, narrow spaced